Nortel-networks Sun Fire V100 Manual do Utilizador descarregar pdf (Página 39)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

3 In the hostname field, enter <IP address of the MRV LX

terminal server>

4 For port, enter <the port number which corresponds to A/LOM

(Serial A) on the V100 and the MRV LX terminal server>.

Note 1: For LOM ports, use terminal server ports 2100-2400

(physical ports 1-4). For Serial ports, use terminal server ports

3100-3400 (physical ports 11-14).

The port number identifies the location of the target host. This

value is based on the following formula: 2000 + (Port number

physically connected on the MRV LX terminal server x 100).

For example, if the target host is connected to port 9 of the

MRV LX terminal server, then the port number would be 2900.

Port 12 is the port on the back of the MRV LX terminal server

that translates to 3200.

Note 2: Once the connection is established to the target host,

the communication between the user and the component is

treated exactly like a console connection.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 191 192

Sem comentários

Nortel-networks Sun Fire V100 Manual do Utilizador Página 39