Nortel-networks Media Dependent Adapters 302403-G Manual do Utilizador descarregar pdf (Página 7)

• “GBIC MDA” on page 22

10BASE-T/100BASE-TX MDAs

The 10BASE-T/100BASE-TX MDAs use four RJ-45 (8-pin

modular) connectors, configured as media dependent interface-

crossover (MDI-X) connectors. These ports connect over straight

cables to the network interface controller (NIC) card in a node or

server, similar to a conventional Ethernet repeater hub.

If you connect to another Ethernet hub or Ethernet switch, you

need a crossover cable unless an MDI connection exists on the

associated port of the attached device.

The following are the 10BASE-T/100BASE-TX MDAs.

• 400-4TX MDA, page 6

• 8100-4TX MDA, page 6

• BPS2000-4TX MDA, page 8

For a complete list of MDAs, see Table 1 on page 4. For

installation instructions, see “Installing an MDA” on page 24.

Figure 1 shows the front panels of the 400-4TX MDA and the

8100-4TX MDA.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Sem comentários

Nortel-networks Media Dependent Adapters 302403-G Manual do Utilizador Página 7