Nortel Networks CALLPILOT 555-7101-226 Manual do Utilizador descarregar pdf (Página 33)

November 2005 Preinstallation requirements

Part 2: 703t Server Hardware Installation 33

4 Replace the server cover. ❒

5 Place the 703t server in the chosen location (see page 48). ❒

6 Set the DIP switches on the modem (see page 51). ❒

7 Connect the 703t server and devices as follows:

 Connect the monitor, keyboard, and mouse (see page 53). ❒

 Connect the modem (see page 55). ❒

 Connect the 703t server to the ELAN hub (see page 57).

ATTENTION

If a hub is required or used, it must be located at least 6 m

(20 ft) away from the 703t server. This ensures compliance

with EMC requirements.

❒

 Connect the 703t server to the CLAN hub (optional); (see

page 59).

ATTENTION

If a hub is required or used, it must be located at least 6 m

(20 ft) away from the 703t server. This ensures compliance

with EMC requirements.

❒

 Install the software feature key adapter (see page 60). ❒

 Connect the power cords for all devices, and then power

them up (see page 62).

❒

8 Start the 703t server (see page 64). ❒

Step Description Check

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Sem comentários

Nortel Networks CALLPILOT 555-7101-226 Manual do Utilizador Página 33