Nortel Networks 24T Manual do Utilizador descarregar pdf (Página 197)

Using the Console Interface

309985-B Rev 00

3-59

MultiLink Trunk Configuration Screen

The MultiLink Trunk Configuration screen (Figure 3-25

) allows you to configure

up to six trunks in a standalone switch or stack. In a stack configuration, trunk

members can be distributed between any of the units within the same stack

configuration.

Any mix of up to eight BayStack 410-24T switches and BayStack 450 switches

can be stacked to provide a total of 224 ports (when all MDA slots are configured

with the maximum port availability).

Figure 3-25

shows six trunks in a stack configuration:

• Trunk 1 has four trunk members in unit 3.

• Trunks 2, 3, 4, and 5 each have two trunk members in individual units.

• Trunk 6 has four trunk members distributed into four separate units of the

stack.

When the trunks are enabled, the trunk members take on default settings necessary

for correct operation of the MultiLink Trunking feature. These default settings can

affect the correct operation of your configured network. If you disable a trunk, you

may need to reconfigure the specific trunk members switch ports to return to the

previous switch configuration. See “MultiLink Trunks” on page 1-64 for more

information.

Choose Trunk Configuration (or press t) from the MultiLink Trunk Configuration

Menu screen to open the MultiLink Trunk Configuration screen.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 309 310

Sem comentários

Nortel Networks 24T Manual do Utilizador Página 197