Nortel-networks M3310 Manual do Utilizador descarregar pdf (Página 100)

100 Digital Telephone IP Adapter Installation and Administration Guide

Configuring the IP Adapter unit using the telephone menu Standard 2.1

not enable

prioritizing of

voice packets in

the IP header,

1Press 2.

2Press the Hold key.

Result: The telephone display asks if you want to

enable 802.1Q Mapping, similar to the following:

Enable 802.1Q Mapping?

[1-Yes 2-No]

enable prioritizing

of voice packets in

the IEEE Media

Access Control

layer (802.1Q),

1Press 1.

2Press the Hold key.

Result: The telephone display prompts you for the

VLAN ID, similar to the following:

VLAN ID [0-4094] 0=NC:

3 Enter the Virtual Local Area Network (VLAN) ID

for 802.1Q Mapping.

Valid entries are 0 (0 = Not Configured) through

4094 (0xFFE). The default is 0.

4Press the Hold key.

Result: The telephone display prompts you for the

802.1Q priority value, similar to the following:

802.1Q Priority [0-7]

5 Enter the priority value for 802.1Q Mapping.

Valid entries are 0 through 7. The default is 6.

6Press the Hold key.

Result: The telephone display prompts you for the

DiffServ CodePoint value, similar to the following:

DiffServ CodePoint Val:

IF you want to THEN do the following:

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 263 264

Sem comentários

Nortel-networks M3310 Manual do Utilizador Página 100