Nortel Networks 10BASE-T Manual do Utilizador Página 162

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 161
Using the BayStack 410-24T 10BASE-T Switch
3-20
309985-C Rev 00
IGMP Configuration...
Displays the IGMP Configuration Menu (see
IGMP Configuration
Menu on page 3-72). This screen allows you to optimize IP multicast
traffic by setting up IGMP port memberships that filter IP multicast on
a per port basis (see IGMP Snooping on page 1-54 for more
information about this feature).
Display Port Statistics
Displays the Port Statistics screen (see
Port Statistics on page 3-79).
This screen allows you to view detailed information about any switch
port.
Clear All Port Statistics
Allows you to clear all port statistics.
This option is followed by screen prompts that precede a choice of
actions:
If the switch is operating
standalone
, choose one of the following:
Yes, to clear all port statistics for all switch ports
No, to abort the option
If the switch is
participating in a stack configuration
, choose one of
the following:
Clear all port statistics for a specific unit in the stack
Clear all port statistics for the entire stack
No, to abort the option
ATM Configuration...
Appears only when an ATM MDA is installed in one of the units of your
stack configuration. When the ATM MDA is installed, selecting this
option displays the ATM Configuration Menu (see
ATM Configuration
Menu on page 3-83).
Note:
Your BayStack 410-24T switch does not support the ATM MDA
hardware. However, if a unit in your stack (such as a BayStack 450
switch) is configured with the ATM MDA, you can manage the ATM
MDA from your switch. Refer to the
BayStack 450 Switch’s User Guide
for detailed information about the ATM MDA.
Return to Main Menu
Exits the Switch Configuration Menu screen and displays the main
menu.
Table 3-5. Switch Configuration Menu Screen Options
(continued)
Option Description
Vista de página 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 329 330

Comentários a estes Manuais

Sem comentários