Nortel Networks 10BASE-T Manual do Utilizador descarregar pdf (Página 181)

Using the Console Interface

309985-C Rev 00

3-39

VLAN Configuration Menu

The VLAN Configuration Menu screen (Figure 3-16) allows you to select the

appropriate screen to configure up to 64 VLANs (VLAN 1 is port-based, by

default). You can configure as many as 63 protocol-based VLANs, with up to 15

different protocols. The number of different protocols you can configure depends

on the number of hexadecimal values (PID values) associated with the protocol

type (some protocol types use more than one PID value, see Table 3-14

page 3-45

When you create VLANs, you can assign various ports (and therefore the devices

attached to these ports) to different broadcast domains. Creating VLANs increases

network flexibility by allowing you to reassign devices to accommodate network

moves, additions, and changes, eliminating the need to change physical cabling.

See “I

EEE 802.1Q VLAN Workgroups” on page 1-38 for detailed information

about configuring VLANs.

Choose VLAN Configuration (or press v) from the Switch Configuration Menu

screen to open the VLAN Configuration Menu.

Note:

The BayStack 410-24T switch ports do not have the ability to assign

incoming untagged frames to a protocol-based VLAN (see “

Gigabit Ports and

BayStack 410-24T Switch Ports Restriction” on page 3-47).

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 329 330

Sem comentários

Nortel Networks 10BASE-T Manual do Utilizador Página 181