Nortel Networks 10BASE-T Manual do Utilizador descarregar pdf (Página 59)

100

101

Introduction to the BayStack 410-24T Switch

309985-C Rev 00

1-29

BayStack 400-ST1 Cascade Module

The front-panel components of the BayStack 400-ST1 Cascade Module are shown

in Figure 1-11

. Component descriptions follow the figure.

Figure 1-11. BayStack 400-ST1 Front-Panel Components

Cascade A Out Connector

Provides an attachment point for connecting this unit to another unit via the

cascade cable. A return cable from another unit’s Cascade A Out connector to this

unit’s Cascade A In connector completes the stack connection (see the example

shown in Figure 1-12

Unit Select Switch

The Unit Select switch (up = Base) determines the base unit for the stack

configuration (see “

Base Unit” on page 1-31). The Unit Select switch status is

displayed on the BayStack 450 LED display panel. When the Unit Select switch is

in the Base (up) position, all other Unit Select switches in the stack configuration

must be set to Off (down).

Cascade A Out

Cascade A In

Unit Select

Base

1 = Blank connectors (unused)

2 = Cascade A Out connector

3 = Unit Select switch

4 = Cascade A In connector

BS0031B

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 329 330

Comentários a estes Manuais

Sem comentários

Nortel Networks 10BASE-T Manual do Utilizador Página 59

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Nortel Networks 10BASE-T