Nortel Networks 10BASE-T Manual do Utilizador descarregar pdf (Página 213)

Using the Console Interface

309985-C Rev 00

3-71

Table 3-26 describes the Rate Limiting Configuration screen fields.

Table 3-26. Rate Limiting Configuration Screen Fields

Field Description

Unit

Appears only if the switch is participating in a stack configuration. The field allows

you to select the number of the unit you want to view or configure. To view or

configure another unit, type its unit number and press [Enter], or press the

spacebar on your keyboard to toggle the unit numbers.

Port

Indicates the switch port numbers that correspond to the field values in that row of

the screen (for example, the field values in row 2 apply to switch port 2). Note that

the values applied in the All row (bottom row) affect all switch ports.

Packet Type

Allows you to select the packet types for rate limiting or viewing.

Default Both

Range Both, Multicast, Broadcast

Limit

Sets the percentage of port bandwidth allowed for forwarding the packet types

specified in the Packet Type field. When the threshold is exceeded, any additional

packets (specified in the Packet Type field) are discarded

1 Rate limiting is disabled if this field is set to None. This allows you to select and view the percentage of specific packet

types present in the network, without inadvertently limiting the forwarding rate.

Default None

Range None, 10%, 9%, 8%, 7%, 6%, 5%, 4%, 3%, 2%, 1%

Last 5 Minutes

This read-only field indicates the percentage of packets (of the type specified in

the Packet Type field) received by the port in the last five minutes. This field

provides a running average of network activity and is updated every 15 seconds.

Note that this field indicates the receiving port’s view of network activity,

regardless of the rate-limiting setting.

Last Hour

This read-only field indicates the percentage of packets (of the type specified in

the Packet Type field) received by the port in the last hour. This field provides a

running average of network activity and is updated every five minutes.

Note that this field indicates the receiving port’s view of network activity,

regardless of the rate-limiting setting.

Last 24 Hours

This read-only field indicates the percentage of packets (of the type specified in

the Packet Type field) received by the port in the last 24 hours. This field provides

a running average of network activity and is updated every hour.

Note that this field indicates the receiving port’s view of network activity,

regardless of the rate-limiting setting.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 329 330

Comentários a estes Manuais

Sem comentários

Nortel Networks 10BASE-T Manual do Utilizador Página 213

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Nortel Networks 10BASE-T